Farallon Communications NetopiaTM - Manual (Page 61)

AT Commands 61
AT>Hs View Help Information for Command s
AT>VC View Current Profile
AT>VCC View the Call and COM Por t Dynamic Parameters
AT>VCD View All Dynamic Parameters (Call, COM, V.120, PPP, MLPPP)
AT>VCP View the Protocol Parameters (V.120, PPP, MLPPP)
AT>VCS View All Static Parameters (ISDN, Rate Adaption)
AT>VD View Troubleshooting Information (including cause code)
AT>VDC View Connection Status
AT>VDL View Link States
AT>VPn View Stored Profile n
AT>VT View Stored Phone Numbers
AT>Z Restar t Netopia ISDN PC Card
ATA Answer Calls
ATDn Dial a Number
ATEn Local Echo
ATH Hang up a Call
ATIn View Product Information
AT=n Set Last Accessed S-Switch to n
ATO Return Online
ATQn Quiet Result Codes
ATS0=n Rings to Auto-Answer
ATS1? View Ring Count
ATS2=n Escape Character
ATS3=n Carriage Return Character
ATS4=n Line Feed Character
ATS5=n Back Space Character
ATSn Establishes S-Register n as the Selected Register
ATSn? Repor ts the Value of S-Register n
ATSn=v Set S-Register n to Value v
AT=v Set Last Accessed S-Register to Value v
AT? View Last Accessed S-Register
ATVn Result Code Format
ATWn Connect Message Control
ATXn Extended Result Codes
ATZn Restar ts Netopia ISDN PC Card
AT Command Description