Farallon Communications NetopiaTM - Manual (Page 26)

26 Chapter 4
2. Verify that the terminal emulation program uses the same
COM por t that the Netopia ISDN PC Card is emulating.
3. Enter the following command at the prompt and press Enter:
AT@MENU
The main VT100 Configuration Tool screen appears:
VT100 C ONFIGURATION T OOL SCREEN NAVIGATION
The following table lists the keys used to move within the
VT100 Configuration Tool screens:
Key Description
Up arrow Moves the cursor to the previous field.
Down arrow Moves the cursor to the next field.
Right arrow Moves to the sub-menu level. For a text field,
moves the cursor one character to the right.
Left arrow Moves to the previous menu level. For a text field,
moves the cursor one character to the left.
Enter Validates the configured setting and moves to the
next field. Also moves to the next menu.
Tab Moves to the next field.