Farallon Communications NetopiaTM - Manual (Page 44)

44 Chapter 5
U SING OTHER COMMUNICATIONS APPLICATIONS
Your Netopia ISDN PC Card works with any standard
communications application that uses AT commands. When
configuring your application, select the Netopia ISDN PC Card, if it
is listed. If no special setting is available for Netopia, select a
Hayes-compatible modem configuration, such as “generic
modem”. Refer to your communications software documentation
for more details.
D IALING WITH AT COMMANDS
Communications applications communicate with the Netopia ISDN
PC Card using standard AT commands. When you place a call
from your computer, the Netopia ISDN PC Card recognizes the AT
command ATD to dial a digital ISDN data call. Correct examples of
outgoing circuit-switched ISDN modem commands with dial
strings are shown below.
■ Dialing with spaces: AT D 1 800 555 1212
■ Dialing without spaces: ATD18005551212
■ Dialing with a 56 kbps line: ATDi18005551212
(Your telephone company will tell you if you have a 56 kbps
line.)
■ Dialing with Multilink PPP: ATD18005551212~18005551212
Note: In Nor th America, most areas require you to dial ISDN calls
with 11 digits (for example, 1-800-555-1212), even for local calls.