Fluke HPMS - Manual (Page 104)

RPM4/HPMS A70M/A20M-AF OPERATION AND MAINTENANCE MANUAL
© 2007 DH Instruments, a Fluke Company Page 94
SSn
Purpose
Read or set the current pressure stability limit.
Command
Query “SS limit”
“SS?”
Classic “SS=limit”
“SS”
Optional Suffix “n”
The active Q-RPT is assumed if no suffix is given.
‘1’ Specify the Hi Q-RPT
‘2’ Specify the Lo Q-RPT
Arguments Limit: The stability limit in the current pressure unit of measure.
Remarks The stability limit can be read and set as a pressure. The stability limit is used as the
Ready/Not Ready criteria..
Example
(enhanced) Cmd sent:
Query reply: “SS .1”
“0.10 kPa/s”
(No reply from GPIB-488)
Example
(enhanced) Cmd sent:
Query reply: “SS? .1”
“0.10 kPa/s”
Example
(classic) Sent:
Reply: “SS=.1”
“0.10 kPa/s”
Errors ERR# 6:
ERR# 10:
The argument was invalid.
Invalid or missing command suffix.
See Also “SS%”
3.4.3
TIME
Purpose
Read or set the RPM4 internal clock.
Command
Query “TIME hh:mmXX”
“TIME?”
Classic “TIME=hh:mmXX”
“TIME”
Arguments hh:mm:
XX: The time in a 12 hour format using a colon delimiter
”am” or “pm”
Example
(enhanced) Cmd sent:
Query reply: “TIME 12:52PM”
“12:52pm”
(No reply if GPIB-488)
Example
(enhanced) Cmd sent:
Query reply: “TIME? 12:52PM”
“12:52pm”
Example
(classic) Sent:
Reply: “TIME=12:52PM”
“12:52pm”
Errors ERR# 7: Missing or improper program message argument(s).
See Also “DATE”
3.5.5.3
UCOEFn
Purpose
To identify the coefficient used to convert 1 Pascal to the current pressure unit of measure.
Query “UCOEFn?”
Classic “UCOEFn”
Optional Suffix
“n”
The active Q-RPT is assumed if no suffix is given.
‘1’ Specify the Hi Q-RPT
‘2’ Specify the Lo Q-RPT
Remarks The RPM4 handles all pressure values internally in Pascal. The coefficient replied is
equivalent of 1 Pa in the current pressure unit of measure. This program message allows the
user to convert pressures
Example
(enhanced) Query sent:
Query reply: “UCOEF?”
“0.0010000000”
Example
(classic) Sent:
Reply: “UCOEF”
“0.0010000000”
See Also 3.3.2, 3.5.6, 7.1.1