Fluke HPMS - Manual (Page 74)

RPM4/HPMS A70M/A20M-AF OPERATION AND MAINTENANCE MANUAL
© 2007 DH Instruments, a Fluke Company Page 64
The security levels are structured to support typical levels of operation as shown
in Table 6. Specifically, the security levels prevent execution of the functions
accessed by the key strokes marked by “•”:
Table 6. Security levels
FUNCTION LOW MEDIUM HIGH
[RANGE] •
[ENT] (AutoTest) •
[UNIT] •
[MODE] •
[AutoRange] • •
[LEAK CK] •
[DISPLAY] • •
[HEAD] •
[SDS] (NOT USED IN THIS RPM4 MODEL)
[AutoZ] (in absolute mode) • •
[SETUP] •
[SETUP], <1range> • •
[SETUP], <2res> • •
[SETUP], <4UL> • •
[SETUP], <5ATest> • •
[SPECIAL] •
[SPECIAL], <1AutoZ> • •
[SPECIAL], <1AutoZ>, <1on/1off> • • •
[SPECIAL], <1AutoZ>, <3edit> • • •
[SPECIAL], <2remote> •
[SPECIAL], <2remote>, make changes • •
[SPECIAL], <3head> • •
[SPECIAL], <4SDS> (NOT USED IN THIS RPM4 MODEL) • •
[SPECIAL], <5pref>, <1ScrSvr> • •
[SPECIAL], <5pref>, <2sound> • •
[SPECIAL], <5pref>, <3time> • •
[SPECIAL], <5pref>, <3time>, make changes • • •
SPECIAL], <5pref>, <4ID>, <2edit> • • •
[SPECIAL], <6Punit> • •
[SPECIAL], <7internal> • •
[SPECIAL], <7internal>, <3RPT2x> (NOT USED)) • • •
[SPECIAL], <7interrnal>, <5log>, clear log • • •
[SPECIAL], <8cal> • •
[SPECIAL], <8cal>, <2edit> under any selection • • •
[SPECIAL], <4reset> • •
[SPECIAL], <4reset>, <4cal> • • •
[SPECIAL], <4reset>, <5all> • • •
Remote communications disabled •
“•” indicates the function/menu is NOT accessible.