Installation instructions, Installation – Stovax Aspen User Manual
Page 15
15
IMPORTANT:ENSURE THAT THE APPLIANCE IS
CORRECTLY ADJUSTED FOR THE GAS TYPE AND
CATEGORY APPLICABLE IN THE COUNTRY OF USE.
REFER TO DATABADGE AND TECHNICAL
SPECIFICATIONS AT THE FRONT OF THE BOOKLET.
FOR DETAILS OF CHANGING BETWEEN GAS TYPES
REFER TO SERVICING SECTION 9.
1.1
This appliance must be installed in accordance with the
rules in force, and used only in a sufficiently ventilated
space. Please read these instructions before installation and
use of this appliance.
1.2
These instructions must be left intact with the user.
1.3
Do not attempt to burn rubbish on this appliance.
1.4
In your own interest, and those of safety, this appliance
must be installed by competent persons in accordance with
local and national codes of practice. Failure to install the
appliance correctly could lead to prosecution.
1.5
Keep all plastic bags away from young children.
2.1
Remove the appliance from its packaging, and check that it
is complete and undamaged.
2.2
Put the loose ceramic parts to one side so that they are not
damaged during installation.
These fires have preset High and Low settings with a Gas
working pressure as listed below.
20mb on Natural Gas, 29mb on Butane and 37mb on
Propane with the fire on full.
3.1
Ensure the minimum opening dimensions are correct, place
the decorative basket in the opening ensuring that is sits
centrally.
3.2
Place the gas fire unit centrally into the decorative basket
and mark the fixing positions through the holes in the tray
feet.
3. INSTALLATION
2. UNPACKING
1. SAFETY PRECAUTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION
3.3
Remove both the decorative basket and fire, drill the
marked holes and insert the rawplugs provided. Place the
gas fire in position and secure to the hearth using the screws
provided. See diagram 1.
3.4
Connect the gas supply to the 8mm compression elbow
situated to the right of the valve ensuring the supply pipe
will not interfere with the fit of the decorative components.
See diagram 2.
If the isolation tap is to be fitted under the fire, the GAZCO
GC00060 provides a neat and easy solution.
3.5
Place the decorative components in place ensuring they sit
centrally around the fire.
1
2