Stovax Aspen - Manual (Page 8)

8
USER INSTRUCTIONS
7.6.3 Place one large coal or pebble on top of the pilot shield,
then place 10 alternating large and small coals or pebbles
around the perimeter of the fire. They should sit on the
bottom row of small coals or pebbles and rest against the
inner mass of square blocks. Place one small coal or pebble
on top of the centre of the square blocks. See diagram 15.
7.6.4 Place the remaining 4 large coals or pebbles on top of the
square blocks, ensure that they lean against the central
small coal or pebble and that there are gaps between each
coal or pebble. See diagram 16.
It may be necessary to make small changes to the log
positioning in order to achieve the most pleasing flame
effect but the following guidelines should be followed.
7.7.1 Refer to the log identification chart and identify the
numbers corresponding to the logs that have been supplied.
See diagram 17
7.7.2 Place the two logs (No.13) on top of the beads as shown.
See diagram 18.
7.7.3 Place the large log (No. 1) so that it sits on top of the
previous two logs. Place the burnt effect log (No. B1) in the
centre of the tray as shown. See diagram 19.
AR1272
15
AR1273
16
17
AR1274
18
AR1275
19
7.7 Log & Driftwood Layout – Small Aspen & Chamonix
8