Microtek Converter - Manual (Page 18)

14
Following is an example of Windows2000/Xp how to find and install the driver
of the SCSI device.
If the New Hardware Wizard requires the driver, Start from [B].
If there is a yellow ‘!’ point on the "RATOC System_Inc. IEEE1394-SCSI-3
IEEE1394 SBP2 Device" on the device manager, Start from [A].
[A] On the device manager:
1. Double click on "RATOC System_Inc. IEEE1394-SCSI-3 IEEE1394 SBP2
Device" to open "Properties".
2. Click on "Update Driver..." button on the Driver tab. New Hardware Wizard
will appear.
[B] On the New Hardware Wizard:
3. Select "Install from a list or specific location" and click Next button.
4. Select "Don't search I will choose the driver to install" and click Next.
5. If the device is a scanner device, select "imaging device" and click Next. If the
device is a tape drive, select "Tape drives" and click Next.