Microtek Converter - Manual (Page 44)

40
5-3. Updating firmware on Mac OS 9
Refer to Chapter 5-4 for installation of the utility.
1. Before starting this utility, make sure the followings:
a. Open Extensions Manager and make sure selected set is FR1SX CON-
FIGURATION.
b. Make sure the following two drivers are enabled in the Extensions Man-
ager. FireREX1APIDriver and FireREXLoaderDriver
c. Make sure the following three drivers are disabled in the Extensions Man-
ager. Authoring Support, FireWire Authoring Support and Disc Burner
Extension
2. Open the FRUTY folder and start FR1 Utility.
3. Select Firmware update Utility from the File menu. Following window
will appear. Firmware Rev indicates the current firmware revision.