Microtek Converter - Manual (Page 25)

Macintosh
21
The B’sCrew SIM driver has following restrictions:
1. The SIM Driver mode must be set enable(Default setting is enable). You can
set or reset this mode with the SCSI Configuration utility. Regarding the Util-
ity, refer to Chapter X.
2. The SIM driver doesn’t support Firewire Plug and Play, Hot Swapping
because the original SCSI API doesn’t include these features.
3. As the SIM driver hooks the standard SCSI APIs and substitute for Firewire
API, some SCSI applications or drivers which don’t use standard SCSI APIs
may not work properly.
4. The SIM driver doesn’t support system boot from a SCSI device connected
to the FR1SX.