Microtek Converter - Manual (Page 60)

56
7-8. Write error happens with an old Castlewood ORB
The AC adapter the Castlewood ORB uses may not be able to provide enough
termination power for the FR1SX to work. You should purchase an Optional
AC adapter. Refer to Chapter 8.
7-10. CD-R/RW writing software can not recognize the
CD-R/RW drive with the FR1SX, even though the Mac
OS recognizes the CD-R/RW drive.
The software you are using may not be able to support Firewire interface.
7-9.Castlewood ORB can not be recognized, when you
start your computer with an old ORB
Set 2 seconds at [Delay time between power on and SCSI bus reset] with
the SCSI configuration utility. For more information, refer to Chapter 4.