Microtek Converter - Manual (Page 49)

45
8. If you selected IBM-PC/AT FDISK format at step 7, the message box
saying You should create partition next will appear. Then, click OK. You
will see the screen shown at the step 6 and select Create Partition from the
Edit menu. And then, you will see the screen below. Select File System from
the list box and set Partition size, using the slider bar. Then, click OK to create
partition. If you selected Super FD format at step 7, you will see a screen
similar to the following. Select [File System] from the list box.
9. You must restart your computer for your information to take effect. If you
are using a removable media, the media will be ejected to take effect. So, you
don’t need to restart your computer.
Slider Bar