Microtek Converter - Manual (Page 7)

3
1-3. System Requirements
System
IEEE 1394 (Firewire) enabled system
O S
• Mac OS X 10.1.x or later / Mac OS 9.1 or later
• Windows Server 2003/XP/2000/Me/98SE
SCSI device
• High-Density 50 pin female SCSI-2 connector on a SCSI device (If the SCSI
connector type is different, refer to Chapter 8)
• Term-Power output capability
Caution: As FR1SX gets electric power from Term-Power on SCSI
bus, this output capability is required. If Term-Power output is not
available at your SCSI device such as iomega zip drive, optional AC
adapter is needed. Refer to Chapter 8.
• Terminator ( must be attached to the SCSI device properly )