Multi-Tech Systems MULTIVOIP MVP210/410/810 - Manual (Page 107)

Chapter 6: Using the Software
Multi-Tech Systems, Inc. 107
Logs Screen Details: Field Definitions
Field Name Values Description
Log # column 1 or higher All calls are assigned an event number in chronological order, with the
most recent call having the highest event number.
Start Date,Time
column dd:mm:yyyy
hh:mm:ss The starting time of the call. The date is presented as a day and a month
of one or two digits, and a four-digit year. This is followed by a time-of-day
in a two-digit hour, a two-digit minute, and a two-digit seconds value.
Duration column hh:mm:ss This describes how long the call lasted in hours, minutes, and seconds.
Type H.323, SIP, SPP Indicates the Call Signaling protocol used for the call (H.323, SIP, or SPP).
Status column success or failure Displays the status of the call (whether the call was completed or not).
IP Direction incoming,
outgoing
Indicates whether the call is "incoming" or "outgoing" with respect to the
gateway.
Mode column voice or FAX Indicates whether the event being described was a voice call or a FAX call.
From column gateway name Displays the name of the voice gateway that originates the call.
To column gateway name Displays the name of the voice gateway that completes the call.
Special Buttons
Previous -- Displays log entry before currently selected one.
Next -- Displays log entry after currently selected one.
First -- Displays first log entry
Last -- Displays last log entry.
Delete File -- Deletes selected log file.
Call Details
Voice coder Coder protocol The voice coder being used on this call.
Disconnect Reason "Normal" or
"Local"
disconnection.
Indicates whether the call was disconnected simply because the desired
conversation was done or some other irregular cause occasioned
disconnection (e.g., a technical error or failure).
DTMF Capability inband,
out of band
Expressions
differ slightly for
different Call
Signaling
protocols. Indicates whether the DTMF dialing digits are carried "Inband" or "Out of
Band." The corresponding field values differ for the 3 different VOIP
protocols.
For H.323, this field can display "Out of Band" or "Inband". For SIP it can
display either "Out of Band RFC2833" or "Out of Band SIP INFO" to
indicate the out-of-band condition or "Inband" to indicate the in-band
condition. For SPP it can display "Out of Band RFC2833" or "Inband".
Outbound Digits
Received 0-9, #, * The digits, sent by MultiVOIP to PBX/telco, that were acknowledged as
having been received by the remote VOIP gateway.
Outbound Digits
Sent 0-9, #, * The digits transmitted by the MultiVOIP to the PBX/telco for this call.
Server Details n.n.n.n When the MultiVOIP is operating in the non-direct mode (with Gatekeeper
in H.323 mode; with proxy in SIP mode; or in the client/server configuration
of SPP mode), this field shows the IP address of the server that is directing
IP phone traffic.
Packets sent integer value Number of data packets sent over the IP network in the course of this call.
Packets received integer value Number of data packets received over the IP network in the course of this
call.
Packets lost integer value Number of voice packets from this call that were lost after being received
from the IP network.
Bytes sent integer value Number of bytes of data sent over the IP network in the course of this call.
Bytes received integer value Number of bytes of data received over the IP network in the course of this
call.
FROM Details
Gateway Name alphanumeric Identifier for the VOIP gateway that originated this call.
IP Address n.n.n.n IP address of the VOIP gateway from which the call was received.
Options FEC, SC Displays VOIP transmission options used by the VOIP gateway originating
the call. These may include Forward Error Correction or Silence
Compression.
TO Details
Gateway Name alphanumeric Identifier for the VOIP gateway that completed (terminated) this call.
IP Address n.n.n.n IP address of the VOIP gateway at which the call was completed.
Options Displays transmission options used by VOIP gateway terminating the call.
Supplementary Services Info
Call Transferred To phone number Number of party called in transfer.
Call Forwarded To phone number Number of party called in forwarding.