Multi-Tech Systems MULTIVOIP MVP210/410/810 - Manual (Page 22)

Chapter 3: Software Installation
Multi-Tech Systems, Inc. 22
Actions:
• Select Channel
o
Choose channel parameters:
ƒ Set the Fax parameters to meet your needs
• Set Max Baud Rate to match fax machine (2400 to 14400 bps)
• Fax Volume should not be changed as it may impair function
• Jitter Value affects the time for packet reassembly
• Mode: Select T.38 or FRF 11
ƒ Modem Relay Enable allows modem traffic through the VOIP system
ƒ Adjusting Voice Gain and DTMF should not be done as it may adversely affect quality
ƒ Select a Coder or allow Automatic negotiation
ƒ Advanced Features
• Silence Compression, when enabled, will not send silence packets
• Echo Cancellation removes echo to improve voice quality
• Forward Error Correction allows some bad packets to be recovered
ƒ Choose Auto Call / OffHook Alert settings
• For automatically calling a remote VOIP without dialing (details in Chapter 4)
ƒ Change Dynamic Jitter values if necessary (details in Chapter 4)
ƒ Select any Automatic Disconnection options needed to ensure lines are not left “open”
ƒ Configurable Payload Types are best left at their defaults. Not in the –SS models
o
The Copy Channel button is available for easily transferring these settings to the other channels
• Repeat for all channels to be used