Multi-Tech Systems MULTIVOIP MVP210/410/810 - Manual (Page 69)

Chapter 4: Configuring your VOIP
Multi-Tech Systems, Inc. 69
The fields of the RADIUS screen are described in the table below.
RADIUS Screen Field Definitions
Field Name Values Description
Enable Accounting Y/N When checked, the MultiVOIP will access the accounting functionality of the
RADIUS server.
Server Address n.n.n.n IP address of the RADIUS server that handles accounting (billing) for the
current MultiVOIP unit.
Accounting Port 1 - 65535 TDM time slot at which RADIUS accounting information will be transmitted
and received.
Retransmission
Interval If the MultiVOIP sends out a packet to the RADIUS server and doesn't
receive a response in the retransmit interval, it will retransmit that packet
again and wait the retransmit interval again for a response. How many times
it does this is determined by the setting in the Number of Retransmissions
field.
Number of
Retransmissions 0 - 255
Shared Secret alpha-numeric Client encryption key for the current VOIP unit.
Select Attributes
(button) -- Gives access to RADIUS Attributes screen. On Attributes screen, one can
specify the parameters to be tallied by the RADIUS server for accounting
(usually billing) purposes.
The RADIUS dialog box has a secondary dialog box, RADIUS Attributes, that allows you to customize
accounting information sent to the RADIUS server by the MultiVOIP. The MultiVOIP software logs data about
many aspects of the call traffic going through the MultiVOIP. The RADIUS Attributes screen lets you pick which
aspects will be included in the accounting reports sent to the RADIUS server.
“RADIUS Attributes” Definitions
Field Description Field Description
Select All Log report to include all fields
shown. Start Date, Time Date and time the phone call began.
Channel
Number Data channel carrying call. Call Mode Voice or fax.
Duration Length of call. Packets Received Total packets received in call.
Packets Sent Total packets sent in call. Bytes Received Total bytes received in call.
Bytes Sent Total bytes sent in call. Coder Voice Coder /Compression Rate used for
call will be listed in log.
Packets Lost Packets lost in call. Prefix Matched When selected, the phonebook prefix
matched in processing the call will be listed
in log.
Outbound
Digits Sent DTMF digits received by this
gateway from remote gateway
(if that DTMF set to "Out of
Band"). Call Status Successful or unsuccessful.
Server Details The IP address of the traffic control server being used will be displayed here if the call is handled
through that server. The Options field refers to non-mandatory server features that might be
activated. For example, with H.323, various H.323 Version 4 options might be listed.
From Details To Details
Gateway
Number Originating gateway Gateway
Name Completing or answering gateway
IP Address IP address where call originated. IP Address IP address where call was completed/answered.
Descript Identifier of where call originated. Descript Identifier of where call was completed/answered.
Options When selected, log will not use
Silence Compression and Forward
Error Correction by call originator. Options When selected, log will not use Silence
Compression and Forward Error Correction by
party answering call.