Multi-Tech Systems MULTIVOIP MVP210/410/810 - Manual (Page 32)

Chapter 4: Configuring your VOIP
Multi-Tech Systems, Inc. 32
Ethernet/IP
This section covers the Ethernet settings needed for the MultiVOIP unit. In each field, enter the values that fit the
network to which the MultiVOIP will be connected to. For many of the settings, the default values will work best –
try these settings first unless you know you definitely need to change a parameter.
Figure 4-1: Network parameters
The Ethernet/IP Parameters fields are described in the tables and text passages below. Note that both Diff Serv
parameters (Call Control PHB and VOIP Media PHB) must be set to zero if you enable Packet Prioritization
(802.1p). Nonzero Diff Serv values negate the prioritization scheme.