Multi-Tech Systems MULTIVOIP MVP210/410/810 - Manual (Page 62)

Chapter 4: Configuring your VOIP
Multi-Tech Systems, Inc. 62
Regional
The Regional Parameters are used to set the phone signaling tones and cadences. For the country selected, the
standard set of frequency pairs will be listed for dial tone, busy tone, ‘unobtainable’ tone (fast busy or trunk busy),
ring tone, and other, more specialized tones. If you need settings that are not available, the Custom selection will
let you set the tones to what is necessary. The Regional Parameters fields are described in the table below.
Figure 4-19: Regional parameters