Mercedes-Benz 2006 CL 500 - Manual (Page 102)

101
Controls in detail
Locking and unlocking
Opening the trunk
Opening the trunk from the outside
A minimum height clearance of 6.3 ft
(1.90 m) is required to open the trunk lid.
The trunk lock button is located in the rear
license plate recess.
1 Trunk lock
In vehicles without KEYLESS-GO*: The ve-
hicle must be unlocked.
̈ Press trunk lock 1.
The trunk opens.
i
If the vehicle has previously been
locked with the SmartKey or
KEYLESS-GO*, opening a door from the
inside will trigger the anti-theft alarm
system.
To cancel the alarm, do one of the fol-
lowing:
ț Insert the SmartKey in the starter
switch.
ț Press button Œ or ‹ on the
SmartKey.
In vehicles with KEYLESS-GO*:
ț Grasp an outside door handle.
The SmartKey with KEYLESS-GO
must be within 3 ft. (1 m) of the ve-
hicle.
ț Press the KEYLESS-GO* start/stop
button (
୴ page 35).
The SmartKey with KEYLESS-GO
must be inside the vehicle.
!
The trunk lid swings open upwards au-
tomatically. Always make sure that
there is sufficient overhead clearance.
Vehicles with trunk opening/closing
system*: To stop the opening proce-
dure, press button
Š on the
SmartKey or SmartKey with
KEYLESS-GO*.
i
The trunk can also be opened using
button
Š on the SmartKey or
SmartKey with KEYLESS-GO* or from
its inside in an emergency, see “Trunk
emergency release” (
୴ page 109).