Mercedes-Benz 2006 CL 500 - Manual (Page 198)

197
Controls in detail
Power windows
̄ Power windows
Opening and closing the power
windows
The side windows are opened and closed
electrically. The switches for all side win-
dows are on the driver’s door. The switch
for the front passenger door window is on
the front passenger door.
1 Left door window
2 Right door window
3 Right rear side window
4 Left rear side window
5 Rear side windows override switch
( ୴ page 78)
The additional switches for the rear side
windows are on the rear center console.
6 Left rear side window
7 Right rear side window
Warning!
G
When closing the windows, make sure that
there is no danger of anyone being harmed
by the closing procedure.
The closing of the door windows can be im-
mediately halted by releasing the switch or,
if the switch was pressed past the resis-
tance point and released, by pressing the re-
spective switch.
The closing of the rear side windows can be
immediately halted by releasing the switch.
The door windows are equipped with the ex-
press-close and automatic reversal func-
tion. If a door window encounters an
obstruction that blocks its path in a circum-
stance where you pressed the switch past
the resistance point and released it to close
the door window, the automatic reversal
function will stop the door window and open
it slightly.
If the door window encounters an obstruc-
tion that blocks its path in a circumstance
where you are closing the door window by
pressing and holding the switch, by pressing
and holding button ‹ on the SmartKey,
by pressing and holding the lock button
(vehicles with KEYLESS-GO*) on an outside
door handle, or by pressing and holding
button , or button e on the climate
control panel, the automatic reversal func-
tion will not operate. ୴୴