Mercedes-Benz 2006 CL 500 - Manual (Page 39)

38
Getting started
Adjusting
Seat adjustment
The seat adjustment switches are located
in each door.
1 Head restraint height
2 Seat height
3 Seat cushion tilt
4 Seat cushion depth
5 Seat fore and aft adjustment
6 Seat backrest tilt
̈ Switch on the ignition ( ୴ page 34).
or
̈ Open the respective door.
Seat fore and aft adjustment
̈ Press the switch forward or backward
in the direction of arrow
5.
Adjust seat to a comfortable seating
position that still allows you to reach
the accelerator/brake pedal safely.
The position should be as far to the rear
as possible, consistent with ability to
properly operate controls.
Seat cushion tilt
̈ Press the switch up or down in the di-
rection of arrow
3 until your upper
legs are lightly supported.
Seat cushion depth
̈ Press the switch forward or backward
in the direction of arrow
4 until your
legs are supported comfortably.
Seat backrest tilt
̈ Press the switch forward or backward
in the direction of arrow
6 until your
arms are slightly angled when holding
the steering wheel.
A child’s risk of serious or fatal injuries is
significantly increased if the child restraints
are not properly secured in the vehicle and
the child is not properly secured in the child
restraint. i
The memory function ( ୴ page 122) lets
you store the settings for the seat posi-
tion together with the settings for the
steering wheel and the exterior rear
view mirrors.
!
When moving the seat, make sure
there are no items in the footwell or be-
hind the seats. Otherwise you could
damage the seats.
୴୴