See “starting with keyless-go – Mercedes-Benz 2006 CL 500 User Manual

Page 50

Advertising
background image

49

Getting started

Driving

Starting with KEYLESS-GO*

You can start your vehicle without the
SmartKey in the starter switch using the
KEYLESS-GO start/stop button on the
gear selector lever.

The SmartKey with KEYLESS-GO must be
located in the vehicle.

KEYLESS-GO start/stop button

1 USA only
2 Canada only

̈

Make sure the gear selector lever is set
to P.

̈

Depress the brake pedal during the
starting procedure. Do not depress ac-
celerator.

The gear selector lever lock is released.

̈

Press KEYLESS-GO start/stop button
once.

The engine starts automatically if the
SmartKey with KEYLESS-GO is in the
vehicle.

For information on turning off the engine
with KEYLESS-GO, see “Turning off the en-
gine with KEYLESS-GO*” (

page 59).

Warning!

G

As long as the SmartKey with KEYLESS-GO

is in your vehicle, the vehicle can be started.

Therefore, never leave children unattended

in the vehicle, as they could otherwise acci-

dentally start the engine.

When leaving the vehicle, always take the

SmartKey with KEYLESS-GO with you and

lock the vehicle. Do not leave children unat-

tended in the vehicle, or with access to an

unlocked vehicle.

Advertising
This manual is related to the following products: