Mercedes-Benz 2006 CL 500 - Manual (Page 161)

160
Controls in detail
Control system
Setting locator lighting
With the locator lighting feature activated
and the exterior lamp switch in position
U, the following lamps will switch on
during darkness when the vehicle is un-
locked with the SmartKey:
ț Parking lamps
ț Tail lamps
ț License plate lamps
ț Front fog lamps
To activate locator lighting:
̈ Make sure the function LOCATOR
LIGHTING is set.
̈ Turn the exterior lamp switch to
position
U when exiting the vehicle.
If you do not open a door after unlocking
the vehicle with the SmartKey, the lamps
will switch off automatically after approxi-
mately 40 seconds.
̈ Move the selection marker with
the
æ or ç button to the
LIGHTING submenu.
̈ Press button j or k repeatedly
until you see this message in the multi-
function display:
LOCATOR LIGHTING .
The selection marker is on the current
setting.
̈ Press æ or ç to select the de-
sired setting.
The locator lighting will be switched ON
or OFF .
Setting night security illumination
(Exterior lights delayed switch-off)
Use the HEADLAMPS DELAYED SWITCH-OFF
function to set whether and for how long
you would like the exterior lamps to illumi-
nate during darkness after all doors are
closed. When the delayed switch-off fea-
ture is activated and the exterior lamp
switch is in position
U before the en-
gine is turned off, the following lamps will
remain lit when the engine is turned off:
ț Parking lamps
ț Tail lamps
ț License plate lamps
ț Front fog lamps
i
You can reactivate this function within
10 minutes by opening a door.
If after turning off the engine you do not
open a door or do not close an opened
door, the lamps will automatically
switch off after 60 seconds.