Mercedes-Benz 2006 CL 500 - Manual (Page 41)

40
Getting started
Adjusting
Folding front seat backrest forward
1 Release lever
Folding backrest forward
̈ Lift release lever 1 and fold the seat
backrest forward.
The seat will automatically slide for-
ward and the head restraint will move
down.
Folding backrests back
̈ Lift release lever 1 and fold backrest
back.
The seat and head restraint return to
their previous positions.
i
To interrupt the procedure, activate the
seat adjustment switch (
୴ page 38) or
move the release lever again.
!
When moving the seat, make sure
there are no items in the footwell or be-
hind the seats. Otherwise you could
damage the seats.
Warning!
G
Always ensure that no one can become
trapped or injured when the seat is moving.
In case potential danger exists, the proce-
dure can be interrupted by moving the seat
adjustment switch ( ୴ page 38) in the door
control panel or by moving the release lever
again.
Warning!
G
The seat belts provide protection only with
the backrest locked in place. Therefore, the
backrest must be locked in place with the
vehicle in motion. Do not drive the vehicle
when the backrest is not locked in place.
If the warning message:
SEAT BACKREST, RIGHT
LOCK
or
SEAT BACKREST, LEFT
LOCK