Mercedes-Benz 2006 CL 500 - Manual (Page 54)

53
Getting started
Driving
̈ Push combination switch in the direc-
tion of arrow
1.
The high beam headlamps are switched
on.
The high beam headlamp
indicator
A in the tachometer
comes on.
For more information, see “Lighting”
(
୴ page 125).
Turn signals
The combination switch is located on the
left of the steering column.
Combination switch
1 Turn signals, right
2 Turn signals, left
̈ Press the combination switch up 1 or
down 2.
The corresponding turn signal indicator
lamp
L or K flashes in the in-
strument cluster ( ୴ page 24).
The combination switch resets automati-
cally after major steering wheel move-
ments.
i
To signal minor directional changes,
e.g. passing or changing lanes, move
combination switch to point of resis-
tance only and release. The turn signal
flashes three times.