Mercedes-Benz 2006 CL 500 - Manual (Page 381)

380
Practical hints
Replacing bulbs
Notes on bulb replacement ț Only use 12-volt-bulbs of the same
type and with the specified watt rating.
ț Switch lights off before changing a bulb
to prevent short circuits.
ț Always use a clean lint-free cloth when
handling bulbs.
ț Your hands should be dry and free of oil
and grease.
ț If the newly installed bulb does not
come on, visit an authorized
Mercedes-Benz Center.
Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center.
ț Additional turn signal lamps in the exte-
rior rear view mirrors
ț Bi-Xenon lamps
ț High mounted brake lamp
ț Brake lamps
ț Front side marker lamps
ț Rear side marker lamps
ț Rear parking lamps
Warning!
G
Keep bulbs out of reach of children.
Bulbs and bulb sockets can get very hot. Al-
low the lamp to cool down before changing
a bulb.
Halogen lamps contain pressurized gas.
A bulb can explode if you
ț touch or move it when hot
ț drop the bulb
ț scratch the bulb
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.
i
Have the headlamp adjustment
checked regularly.