Mercedes-Benz 2006 CL 500 - Manual (Page 148)

147
Controls in detail
Control system
TEL menu*
You can use the functions in the TEL menu
to operate your telephone, provided it is
connected to a hands-free system and
switched on.
̈ Switch on the telephone and COMAND.
̈ Press button è or ÿ on the
steering wheel repeatedly until you see
the
TEL menu in the multifunction dis-
play.
Which messages will appear in the multi-
function display field depends on whether
your telephone is switched on or off:
ț If the telephone is off, the message in
the multifunction display is:
TEL OFF .
ț If the telephone is on:
The telephone will then search for a
network. During this time the multi-
function display reads
NO SERVICE .
As soon as the telephone has found a
network,
READY is indicated in the mul-
tifunction display.
The standby message indicates that your
telephone is ready for use and you can op-
erate it using the control system.
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving. For your safety and the
safety of others, we recommend that you
pull over to a safe location and stop before
making or taking a telephone call. If you
choose to use the telephone while driving,
please use the hands-free device and only
use the telephone when weather, road and
traffic conditions permit.
Some jurisdictions prohibit the driver from
using a cellular telephone while driving a ve-
hicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or
personal injury.