Mercedes-Benz 2006 CL 500 - Manual (Page 382)

381
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
̈ Turn the exterior lamp switch to M
( ୴ page 52).
̈ Open the hood ( ୴ page 273) (except
for side marker lamps).
1 Housing cover for high beam flasher
bulb, parking and standing lamp
2 Electrical connector for high beam
flasher housing bulb
3 Bulb socket for parking and standing
lamp
4 Bulb socket for turn signal lamp
5 Housing cover for Bi-Xenon headlamp
Bi-Xenon headlamp
Warning!
G
Do not remove the cover for the Bi-Xenon
headlamp. Because of high voltage in Xenon
lamps, it is dangerous to replace the bulb or
repair the lamp and its components. We rec-
ommend that you have such work done by a
qualified technician.