Mercedes-Benz 2006 CL 500 - Manual (Page 162)

161
Controls in detail
Control system
To activate night security illumination:
̈ Select delayed switch-off period (see
below).
̈ Turn the exterior lamp switch to
position
U before turning off the en-
gine.
To select delayed switch-off period:
̈ Move the selection marker with
the
æ or ç button to the
LIGHTING submenu.
̈ Press button j or k repeatedly
until you see this message in the multi-
function display:
HEADLAMPS DELAYED
SWITCH-OFF .
The selection marker is on the current
setting.
̈ Press æ or ç to select the de-
sired lamp-on period.
You can select:
ț 0 SEC. , the delayed switch-off fea-
ture is deactivated
ț 15 SEC. , 30 SEC. , 45 SEC. , or
60 SEC. , the delayed switch-off fea-
ture is activated
You can temporarily deactivate the de-
layed switch-off feature:
̈ Before leaving the vehicle, turn the
SmartKey in the starter switch to
position 0.
̈ Turn the SmartKey in the starter switch
to position 2 and back to 0.
The delayed switch-off feature is deac-
tivated. It will reactivate as soon as you
reinsert the SmartKey in the starter
switch.
Vehicles with KEYLESS-GO*:
̈ Press the KEYLESS-GO start/stop but-
ton (
୴ page 35) on the gear selector le-
ver.
Interior illumination delayed switch-off
Use this function to set whether and for
how long you would like the interior light-
ing to remain lit during darkness after the
SmartKey is removed from the starter
switch.
̈ Move the selection marker with
the
æ or ç button to the
LIGHTING submenu. ୴୴