Metz 58 AF-1 P - Manual (Page 100)

100
Troubleshooting hints - After-sales service
Soluzione di problemi, servizio assistenza
Fouten, remedie, service
- Has the camera’s flash unit been set at controller
address 1? Controller address 2 cannot be used for
SLAVE flash units!
If the mecablitz still does not function in spite of all these
checks, then:
- Turn off the flash unit by its main switch
ቤ , wait for a
while, and then turn on again.
Should the mecablitz still not operate properly then consult
an authorised Metz dealer.
798 47 0151-A1 DocuPart 27.05.2008 16:02 Uhr Seite 100