Moog DS2100 - Manual (Page 42)

DS2100 User's Manual (Preliminary)
SECTION 3: WIRING AND INSTALLATION
PAGE 3-36
3.9.3 C Size DC Bus Inter-connection
Tie screen to chassis via
EMC bracket. See Section 2
L1 L2 L3 PE
(J6.3)(J6.2)(J6.1) Stud
Connector J6, J9
DC+ DC-
(J9.2) (J9.1)
DS2100 C
L1 L2 L3 PE
(J6.3)(J6.2)(J6.1) Stud
DC+ DC-
(J9.2) (J9.1)
DS2100 C
a.c. Mains
L1
L2
L3
Protective
Earth
Connector J6, J9
Figure 3.23 Size C DC Bus Inter-connection
J6
-
Fixed connector: 5 pins, male connector
- Mating connector, 5 pins, female, crimped supplied with the drive. (Molex 42816-0512)
- C size wiring: cable 8 AWG (8.4 mm 2 ).
- PE Stud wiring: cable 6 AWG (13mm 2 )
J9
-
Fixed connector: 2 pins, male connector
- Mating connector, 2 pins, female, crimped supplied with the drive. (Molex 42816-0212)
- C size wiring: cable 8 AWG (8.4 mm 2 ).
Pos. Name Function
J9.2 DC+ DC Bus (+)
J9.1 DC- DC Bus (-)
Table 3.11 J9, DC Bus connector, C Size