Moog DS2100 - Manual (Page 45)

SECTION 3: WIRING AND INSTALLATION
DS2100 User's Manual (Preliminary)
PAGE 3-39
3.10.1 mA Size Regeneration Resistor Connection
Tie screen to
panel on
which resistor
is mounted.
Tie Screen to
chassis via EMC
bracket. See
Section 2
Installation
J6.2 J6.3
DC+ RR
Connector J6
DS2100 mA
Recovery
Resistor
Figure 3.25 DS2100 Size mA External Regeneration Connections
- Fixed connector: 12 pins, male connector
- Mating connector, 12 pins, female, supplied with the drive. Phoenix Combicon (Part # GMSTB 2.5/12-ST-7.62)
- mA size wiring: cable 14 AWG (2.1 mm 2 ). Wire stripping: 7 mm.
- Tightening torque: 0.5Nm.
Pos. Name Function
J6.2 DC+ DC Bus (+)
J6.3 RR Regeneration Resistor
Table 3.14 J6, Regeneration Resistor connector, mA Size
3.10.2 A, B Size Regeneration Resistor connection
Tie screen to
panel on
which resistor
is mounted.
Tie Screen to
chassis via EMC
bracket. See
Section 2
Installation
J6.2 J6.3
DC+ RR
Connector J6
DS2100 A, B
Recovery
Resistor
Figure 3.26 DS2100 Size A,B External Regeneration Connections