MGE UPS Systems 66074 - Manual (Page 15)

www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual 34003676EN/GA Page 15/69
3.2.3 3-Phase display
Click 3-phase display to access to the detailed monitoring page
This item is added to the menu for all single UPSs having a three-phase output.
The link on the gauge symbols gives access to the measurement page related to the function.
Function symbols are outlined in red when an alarm is present.
The red triangle, linked to the alarm page, appears when an alarm is present, otherwise a green
symbol is displayed.
This page is automatically refreshed every 10 seconds (by default).
To change this value, go to the “
System ” page.
.
3.2.3.1 Normal input measurements
Rectifi
Battery
Inverte
Static ByPass
Maintenance position
Static switch operation
Normal operation
Battery
Active power – Global and per phase
Apparente power – Global and per phase
Output current
Output voltagePhase / Phase
Output voltage Phase / neutral
Frequency and power factor
Input current
Input voltagePhase / Phase