MGE UPS Systems 66074 - Manual (Page 33)

www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual 34003676EN/GA Page 33/69
3.5.2 System
Click the “System” section in the menu.
This menu enables the customisation of the information on the UPS properties and Environment pages.
Z UPS contact: This text field is limited to 32 characters. Enter the name of the person responsible for UPS
administration at IT network level and/or electrical maintenance. This field does not appear on any other
Web page. By default, its value is “Computer Room Manager”.
Z UPS location: Enter a description (limited to 32 characters) of the location of the UPS in your installation
(e.g. Computer room E1-C066). This text is displayed on the home page at the top right, above the name of
the UPS. Its value by default is “Computer room”.
Z History Log interval: [5 to 99999 seconds]. Measurement save period. Default value = 60 sec.
Z Refresh rate: [5 to 99999 seconds]. Home page and alarms table refresh period. Default value = 10 sec.
Z Default language: Enables initialisation of the browser language at card connection.
Auto: Automatically displays the Web page texts in the same language as your browser. If the Network
Management Card is not able to display the recognised language, the pages will be displayed in English.
Choice of one of the available languages: English, French, Italian, German, Spanish changes the
language of the html interface pages
Z Note:
Alarm notification remains in English / French (reboot the browser after modification).
SNMP message remain in English.