MGE UPS Systems 66074 - Manual (Page 31)

www.mgeups.com
Network
Management Cards
User Manual
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual 34003676EN/GA Page 31/69
3.5.1 Network Settings
Click on the “Network” section in the menu.
This menu enables the administrator to configure the network parameters of the card and authorisation of the
remote upgrade of the embedded system.
Z IP address: The IP address of the card (e.g.: 172.17.23.205).
Z Subnet Mask: The mask of the sub-network of your network (e.g.: 255.255.255.0).
Z Gateway Address: Indicate the IP address of the gateway to access the stations located outside the
card’s sub-network (e.g.: 172.17.1.24).
Z Hostname must be suited to the card. This is the first part of the full qualified domain name, used by the
DNS (name must be compatible with DNS rules)
Z Domain name is the domain to which the card belongs. This is the part of the full qualified domain name
that follows the host name and is used by the DNS. The default value of the two parameters comprising the
full qualified domain name: ups.domain.com
Z TELNET connection: Authorises (choose enable) remote connection with a terminal to access the
maintenance menu.
See “ Configuration in local mode and via Telnet “ for more information
Z BootP/DHCP: Authorises (choose enable) configuration of network parameters with your BootP/DHCP
server when the card is booted