Monessen Hearth Direct Vent Gas Fireplace MDV500 - Manual (Page 33)

75D2523 33
CANOPY INSTALLATION
AND
GLASS REMOVAL
Remove top louver assembly before installing canopy.
1. Unhook top louver assembly. Set aside. See Figure 42.
2. Attach canopy to underside of top outer shell with three (3) screws provided. See Figure 43.
3. Hook top louver assembly back into place.
Figure 42 - Removing
Top Louver Assembly
Figure 43 - Installing
Canopy
Louver
Assembly
Screws
Canopy
GLASS FRAME REMOVAL
1. Remove louver assembly from the top.
2. Release three (3) clamps on bottom of fireplace.
See Figure 44.
3. Tilt glass frame out and lift glass frame up until
it clears hook on top of fireplace.
4. Set glass frame aside.
Figure 44 - Removing Glass Frame
CAUTION
Each clamp
has a quick
spring
force. When
reinstalling
clamps, keep
fingers clear.
Glass Frame
Clamps