Mega System Tech iCV-02 User Manual
Page 18
iCAMView user manual -15-
Chapter 4: Using iCAMView Utility to Setup IP & Update Firmware
Use this section to set the IP Address of iCAMView.
When using iCAMView for the first time, it is advisable to choose the “Using Static IP
Address” option. For this option, the user will have to enter an IP Address, Subnet
Mask and Gateway of their choice (refer to Appendix C for IP address explanation).
Fig.9. IP Configuration: Set an IP Address for iCAMView
Once the IP Address is set, you will be able to connect to iCAMView webpage by
entering this IP Address into a standard browser.
“Obtain an IP address by DHCP or BOOTP”
The IP address, Subnet Mask and Gateway is acquired directly and assigned
automatically by the system.
2.3.2 Advanced
This section sets security password against unauthorised access to devices through
iCAMView Utility.