Mega System Tech iCV-02 - Manual (Page 25)

iCAMView user manual -22-
Chapter 5: iCAMView Web Manager
2.1 Web-Camera Selection
Click on either “ActiveX” or “Sun Java” from Camera
A or B to view the camera images.
By default the first USB camera connected to
iCAMView will be denote as “Camera A”
Click “Camera B” to view camera B.
Note: ActiveX can only function on Windows
platform and a plug-in has to be installed on the
client's computer. If this is prohibited for safety
reasons you will have to use Sun Java to view the
video feed. Sun Java also allows users who are not using Windows based Operating
System to view the video feed.
Once you click on “Camera A” the
following image will appear.
Make sure to adjust the USB camera
lens for best picture results.
Click on the controls along the
Window to control the camera.
Note:
The pan and tilt controls will only work
with cameras which has this function
built-in.
Click to record the current image to the selected directory. The default directory
is C:\Program Files\Megatec\iMultiView
To change the saved location and filename. Click and the “Save As” window will
pop up. Choose an alternate location and filename. Click the “Save” button to confirm
changes.