Mega System Tech iCV-02 - Manual (Page 19)

iCAMView user manual -16-
Chapter 4: Using iCAMView Utility to Setup IP & Update Firmware
Fig.10. IP Configuration: iCAMView Advanced settings
i. Device Password
Use this to set an access password to the individual device. Once set, the user
must enter the password to access the device. In addition, the IP Address will
not be shown on the right display panel of iCAMView Utility.
iCAMView Utility will request for the “Input Device Password” when you click
either “Setup Wizard”, “Launch iCAMView” or “IP Configuration”
Devise
Password
enabled. IP
Address
hidden.
Devise
Password
not set.