Mega System Tech iCV-02 - Manual (Page 21)

iCAMView user manual -18-
Chapter 4: Using iCAMView Utility to Setup IP & Update Firmware
Fig.11. Upgrade Firmware: Updates iCAMView firmware
If you have downloaded the latest firmware to your local hard drive, check
“Upgrade the iCAMView firmware with file saved on the local hard drive” and
browse to the file location.
2. Click “Next >” to check for the latest available firmware.
3. Select new firmware file (*.bin) and,
4. Click
“Start”.
The iCAMView red and yellow LED will flash alternately to indicate that firmware
upgrading is in progress. Once completed, iCAMView will reboot.
Please check the following URL on a regular basis for the latest firmware;
<http://www.icamview.com/downloads.htm>
NOTE:
If the downloading / upgrade process is interrupted or the data is corrupted,
iCAMView will keep its default firmware to avoid complete data loss. If this happens,
repeat the above firmware upgrade procedure.