Mega System Tech iCV-02 - Manual (Page 24)

iCAMView user manual -21-
Chapter 5: iCAMView Web Manager
2.2 Information
2.3 Basic Settings
2.4 Advanced Settings
2.5 Viewing images using a PDA / Web Enabled Phone
Fig.15. iCAMView Main Menu
When using iCAMView for the first time, you must set the following to ensure that
iCAMView works smoothly;
a. Set the necessary parameters in the “Configuration” menu. In
particular, the “Anti Flicker” under “Camera Settings” should be set to
50Hz or 60Hz (change this to 60Hz or 50Hz / Outdoor if video output
continues to flicker).
b. That the USB PC camera lens is adjusted for best results.
By default the above Camera Settings page is displayed when you login.