Mega System Tech iCV-02 - Manual (Page 50)

iCAMView user manual -47-
Chapter 5: iCAMView Web Manager
2.4.8 About
The administrator can use this section to check firmware information, save/restore
settings, upgrade firmware and see manufacturer’s details.
i. About
This section gives crucial information about iCAMView’s Firmware Version,
Hardware Version and Serial Number. These are required information for
service calls.
ii. Save / Restore Settings
“Save current Configuration”
Click “Save” to save the current settings and configuration to your PC. The text
file will have a default format of YYYY_MMDD_####.cfg. The administrator
can change this, if necessary.
“Restore previous configuration”
This function is only available if a setting has been saved initially. Browse to
the location where the file is saved and click “Restore”
“Reset to factory default”
This function will reset all settings to its default value.
Fig.43. iCAMView About Page
“Upgrade Firmware”