Mega System Tech iCV-02 - Manual (Page 73)

iCAMView user manual -70-
Appendix A: Router Configuration
Enabled/Disabled: Enabled
For ID#2
Service Port: 9001
Service IP: Type in the camera’s IP address, for example: 192.168.0.5
Enabled/Disabled: Enabled
4. Save your settings. iCAMView should now be configured to work with your router
and be accessible from the internet.
DI714
1. Log into your router using your router IP.
2. On the main page, click on Advanced at the top of the page.
3. Click on Virtual Server Settings on the left side of the page.
4. Enter the camera’s IP address into the Internal IP field. Under Service, select All
and then click Submit to save your settings. iCAMView should now be configured to
work with your router and be accessible from the internet.
DI-714P+
1. Log into your router using your router IP.
2. On the main page, click on Advanced at the top of the page.
3. On the left side of the page, click Virtual Server.
4. Enter the following information on the page:
For ID#1:
Service Port: 80
Service IP: Type in the camera’s IP address, for example: 192.168.0.5
Enabled/Disabled: Enabled
For ID#2
Service Port: 9001
Service IP: Type in the camera’s IP address, for example: 192.168.0.5
Enabled/Disabled: Enabled
5. Click Apply to save your settings. iCAMView should now be configured to work
with your router and be accessible from the internet.