Mega System Tech iCV-02 - Manual (Page 29)

iCAMView user manual -26-
Chapter 5: iCAMView Web Manager
Fig.19. Individual Camera Configuration
“Anti Flicker”
Choose between 50Hz, 60Hz or Outdoors. Note: If you do not choose the right
frequency, the image will flicker or lines will appear on the images.
“Maximum Number of Connections (1-30)”
Use this to limit the number of users that can connect to this camera.
“Location”
Enter a suitable location / name for the camera.
“Light Compensation”
Choose “Yes” and iCAMView will increase the lighting of the image. This is
useful when monitoring indoors.
Choose “No” if you do not want iCAMView to adjust the light and view the
images as is.
“Color”
Choose “Yes” for color and “No” for black and white display.
“Camera Position”
Choose from the automatic “0 degree (upright)”, to 90, 180 (upside down), and
270 degree position of the camera. This is to facilitate the ability to reposition the
camera in any way the user desires.
Click “Apply” to save changes. Otherwise, all changes will be lost.
“Pan Control”
Choose from “Normal” or “Reverse”. This is to set the mirror function of the
camera and fix the image the way the user desires each time the user logs on to
view.
“Tilt Control”
Choose from “Normal” or “Reverse”. This is to set the image to its right side up.
Similar to the “Pan Control” function.
2.3.2 Network