Settings required to use e-mail function, Ethernet – Microsoft PRO 906EX User Manual
Page 26
Connecting the Machine
18
1
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Settings Required to Use E-mail Function
This section describes necessary set items for sending e-mail.
Ethernet
This section describes necessary set items for sending e-mail with Ethernet cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Heading
Setting Item
Setting Requirements
interface settings/Network
Machine IPv4 Address
Mandatory
interface settings/Network
IPv4 Gateway Address
Mandatory
interface settings/Network
DNS Configuration
As required
interface settings/Network
DDNS Configuration
As required
interface settings/Network
Domain Name
As required
interface settings/Network
WINS Configuration
As required
interface settings/Network
Effective Protocol
Mandatory
interface settings/Network
Ethernet Speed
As required
interface settings/Network
LAN Type
Mandatory
interface settings/Network
Permit SNMPv3 Communication
As required
interface settings/Network
Permit SNMPv3 Communication
As required
interface settings/Network
Host Name
As required
File Transfer
SMTP Server
Mandatory
File Transfer
SMTP Authentication
As required
File Transfer
POP before SMTP
As required
File Transfer
Reception Protocol
As required
File Transfer
POP3/IMAP4 Settings
As required
File Transfer
Administrator's E-mail Address
As required
File Transfer
E-mail Communication Port
As required
File Transfer
Program/Change/
Delete E-mail Message
As required