Minolta Scanner Mode - Manual (Page 152)

Performing an Internet Fax/IP Address FAX Operation 8
Scanner Mode 8-25
2 Select how to output the
report, and then touch
[Enter].
❍ To output the
transmission report in
method that has been
previously specified,
touch [Default]. Refer to
“Specifying Report
Output Settings” on
page 13-41.
❍ To output a transmission result report with every transmission,
touch [On].
❍ To output a transmission result report only if the transmission
failed, touch [If TX Fail].
❍ To stop the transmission result report from being outputted, touch
[Off].
Specifying the 2in1 transmission setting
➜ Touch [Set 1], and then
touch [2in1].
[2in1] is highlighted.