Minolta Scanner Mode - Manual (Page 42)

Preparation 3
Scanner Mode 3-9
1 In the Network Settings screen, touch [Basic Settings].
2 Specify the necessary settings for the parameters in the page that
appeared.
3 Touch [Enter].
DNS Settings screen
The following parameters can be set from the DNS Settings screen.
Network Board Set Specify the network board transmission speed
(Auto/100 Mbps/10 Mbps) and duplex mode
(Half Duplex/Full Duplex).
*The “Network Board Speed” parameter is
normally set to “Auto”. This automatically selects
the transmission speed through auto
negociation.
The “Duplex” parameter is only available if the
“Network Board Speed” parameter is set to
“100M” or “10M”.
Parameter Description
Parameter Description
DNS Setting Specify whether or not the DNS (Domain Name
System) function is used.
Host Name Type in the host name for the DNS server.
*Type in the server address only if the “DNS
Setting” parameter is set to “Yes”.