Minolta Scanner Mode - Manual (Page 279)

14 Reports and lists
14-4 Scanner Mode
14.2 Checking the Reception Status (Activity Report
(RX))
The reception activity report can confirm the document number, starting
time of reception, time required, recipient, mode, number of printed pages
and the transmission result.
Precautions
● The procedure for manually outputting a report is described below.
● During the production of this unit, it was set to automatically output this
report after every 50 transmissions. Refer to “Specifying Report
Output Settings” on page 13-41.
Outputting the Reception Activity Report
1 Press the [Utility] key.
2 Touch [Reports].
3 Touch [RX Act. Report].
4 Touch [Enter].
The reception activity report
is outputted.
✎
Tip
Even if [Enter] is not
touched, the report is
automatically outputted.