Minolta Scanner Mode - Manual (Page 257)

13 Specifying Management Settings
13-38 Scanner Mode
10 Touch either [ON] or [OFF],
and then touch [Enter].
11 Check the F code settings, and then touch [Enter].
12 Touch [RX Doc. Settings].
13 Select the procedure that
should be performed.
❍ If [Forward] or
[Prt&Forward] was
selected, also select a
forwarding destination.
❍ To specify multiple
recipients, touch [Add
Dest.], and then select
the next recipient.
14 Continue touching [Enter] to return to the Utility screen, and then touch
[Exit] to return to the standby screen (initial screen).