Minolta Scanner Mode - Manual (Page 186)

Using IP Scanner 10
Scanner Mode 10-1
10 Using IP Scanner
✎
Note
In order for a computer to be used as a recipient, the TCP/IP setting
must first be specified.
10.1 IP Scanner
● First, install IP Scanner onto the computer.
Refer to “Installing the Utilities” on page 3-29.
● The transmitted image is received by the Image Receiver, and saved
by IP Scanner as an image file in the “My Images” folder.
If the “Save folder as a key” check box in the main window was
selected, a new folder with the same name as the scanner button is
created and the image file is saved in that folder.
*This setting is available only if the document is scanned with a
scanner function. For details on saving the data when the received fax
document is transferred to IP Scanner, refer to “Sort Settings dialog
box” on page 10-11.
● When using IP Scanner, be sure that Image Receiver is running.
While Image Receiver is running, its icon (
) appears in the Windows
taskbar. Normally, Image Receiver starts up automatically when
Windows starts up. If Image Receiver has not started up, start it up as
described below.
“Start” → “Programs” → “IP Scanner” → “Image Receiver”
● When Image Receiver begins to receive image data, the icon in the
Windows taskbar flashes.
✎
Note
With IP Scanner, JBIG-encoded TIFF files cannot be viewed.